Seeing that tire pressure warning light illuminate on your dashboard can be a bit worrying. If you’re looking for the most current instructions on How To Reset Tire Pressure Light On Honda Accord & CR-V? (2023 Updated), you’ve come to the right place. This guide covers everything from why the light comes on to the exact steps for resetting it on newer models.
The process has changed slightly over the years, especially with the latest Honda vehicles. We’ll make sure you have the correct, up-to-date information for your specific car.
How To Reset Tire Pressure Light On Honda Accord & CR-V? (2023 Updated)
Resetting the TPMS (Tire Pressure Monitoring System) light is a straightforward process you can usually do yourself. The method depends on your Honda’s model year and trim level. Below, you’ll find the two primary methods used for recent Accord and CR-V models.
Understanding Your Honda’s TPMS Light
Before you reset the light, it’s crucial to understand what it’s telling you. The light looks like a cross-section of a tire with an exclamation point inside.
- Solid Yellow Light: This indicates one or more tires are significantly underinflated. You should check and adjust pressures as soon as possible.
- Flashing Yellow Light: A light that blinks for about a minute when you start the car, then stays solid, signals a fault in the TPMS system itself. This often requires a dealer or repair shop to diagnose.
Always check your tire pressures first with a reliable gauge. The recommended pressure is on a sticker inside the driver’s side door jamb, not the tire’s sidewall.
Method 1: Using the Touchscreen Interface (2023+ Models Common)
Many newer Honda Accord and CR-V models, especially higher trims, use the central touchscreen for vehicle settings. This is often the easiest way.
- Ensure your vehicle is parked and the ignition is in the “ON” position. You can do this without starting the engine—just press the START button twice without your foot on the brake.
- Navigate to the HOME screen on your display.
- Select “Settings” (it might look like a gear icon).
- Choose “Vehicle Settings.”
- Scroll to find “TPMS Calibration.” The wording might slightly vary, like “Tire Pressure Monitor System.”
- Select “Calibrate” or “Initialize.”
- Confirm your selection when prompted. The system will begin calibration.
Drive the vehicle normally for the calibration to complete. This can take up to 30 minutes of mixed driving (city and highway). The light should turn off by itself once the system relearns the correct pressure values.
Method 2: Using the Steering Wheel Controls (Common for Older Models)
For many Accords and CR-Vs from roughly 2016 to 2022, the reset is done through the driver information interface (DII) controlled by buttons on the steering wheel.
- Park the car and turn the ignition to ON (Engine off).
- Use the arrow buttons on your steering wheel (usually left or right) to scroll through the DII menus until you see “Vehicle Settings.”
- Press the SEL/RESET button (often in the center of the arrow wheel) to enter the menu.
- Scroll down to “TPMS Calibration” and press SEL/RESET again.
- Select “Calibrate” and press SEL/RESET to confirm.
- You should see a confirmation message like “TPMS Calibration Started.”
Again, you’ll need to drive for the calibration to finish. Make sure all tires are at the correct cold pressure before starting this process.
Method 3: The Physical Button Method (Less Common Now)
Some older models, and a few base trims, may have a physical button. It’s typically located below and to the left of the steering wheel, on the dashboard.
- Inflate all four tires to the exact pressure listed on your door jamb sticker.
- Turn the ignition to ON (engine off).
- Press and hold the TPMS button. You should see the tire pressure light blink twice.
- Release the button. Start the car and drive normally for calibration.
If your car doesn’t have this button, don’t worry—use one of the previous methods instead.
Why Won’t My Tire Pressure Light Turn Off?
Sometimes, even after a reset, the light persists. Here are the most common reasons:
- Incorrect Tire Pressure: One or more tires are still under- or over-inflated. Double-check with a manual gauge.
- Spare Tire: Some models monitor the spare tire. Don’t forget to check it’s pressure too, if it’s a full-size spare.
- Temperature Changes: A sudden drop in outside temperature can lower tire pressure enough to trigger the light.
- System Fault: A sensor battery may be dead (they last 5-10 years), or a sensor is damaged. This requires professional service.
- Recent Tire Rotation or Change: The system may need to be recalibrated after tire work, as the sensor positions have changed.
Step-by-Step Troubleshooting
Follow this checklist if your reset didn’t work:
- Verify all five tires (including spare) are at the exact cold pressure from the door sticker.
- Ensure you completed the calibration drive (20-30 mins of mixed driving).
- Try performing the reset procedure a second time, following the steps precisely.
- If the light flashes first, note it. A flashing light means a system error, not low pressure.
- Visit a tire shop or dealership for a diagnostic scan if the light remains on or flashes.
Important Tips for 2023 Honda Models and Beyond
Honda’s systems are becoming more integrated. For the very latest models, keep these points in mind:
- Always refer to your owner’s manual first. It has the definitive procedure for your VIN.
- The touchscreen method is becoming standard. If you can’t find the setting, use the search function within the settings menu for “TPMS.”
- After a battery disconnect, the system may need a recalibration drive.
- Some models now use an indirect TPMS that uses wheel speed sensors, not individual valve stem sensors. The reset procedure is still required after filling tires.
Remember, the TPMS is a helpful tool, but it’s not a replacement for monthly manual pressure checks with a good gauge. Sensors can fail or be slow to update.
Frequently Asked Questions (FAQ)
How do I reset the tire pressure light on a 2023 Honda Accord?
For most 2023 Accord trims, use the touchscreen. Go to Settings > Vehicle Settings > TPMS Calibration > Calibrate. Ensure tires are properly inflated first.
What is the Honda CR-V TPMS reset button location?
Most newer CR-Vs do not have a physical button. The reset is done via the touchscreen or steering wheel controls. In older models, check the lower left dashboard.
Why is my Honda tire pressure light still on after filling tires?
You must manually recalibrate the system after adjusting pressure. The light won’t turn off by itself just because you added air; you need to initate the calibration process.
Can I drive with the TPMS light on?
If it’s solid, check your pressures as soon as you can. Driving on significantly underinflated tires is dangerous and damages the tire. If it’s flashing, the system is faulty, but your tires may still be fine—check pressures manually and drive cautiously to a service center.
How much does it cost to fix a TPMS sensor on a Honda?
Replacing one sensor at a dealership typically costs between $200 and $350, including parts and labor. An independent tire shop may charge less. The sensor itself is the main expense.
Do I need special tools to reset the Honda TPMS light?
No. For the driver-initiated reset, you only need to know the procedure. If a sensor is broken, a mechanic will need a TPMS scan tool to program the new sensor to your car’s computer.
Final Checklist Before You Reset
To ensure success, run through this list:
- ✅ Tires are cold (car parked for 3+ hours).
- ✅ Pressures match door jamb sticker (use a manual gauge).
- ✅ Spare tire is checked (if applicable).
- ✅ Ignition is ON, engine may be off.
- ✅ You know which method (screen, steering wheel, button) your car uses.
- ✅ You have time for the 20-30 minute calibration drive afterwards.
Following the correct procedure for your specific Honda Accord or CR-V will get that warning light off your dashboard quickly. Regular maintenance is the best way to prevent it from coming on unexpectedly. If you encounter ongoing issues, a professional can provide a definitive diagnosis to ensure your safety on the road.