Finding the correct wiper blade size for your Honda Accord is essential for clear visibility and safe driving. This guide covers all Honda Accord Wiper Blade Sizes from the first generation to the latest models, giving you the exact information you need.
We’ll break it down by year and generation, explain how to measure your current blades, and recommend the best types of blades for your car. Whether you’re replacing them yourself for the first time or just double-checking a parts store recommendation, this article has you covered.
Honda Accord Wiper Blade Sizes
Before we list the sizes, it’s important to know that there are two main measurements: the driver’s side and the passenger’s side. Some older models used the same size on both sides, while most modern Accords use two different lengths. All sizes listed here are in inches, which is the standard measurement for wiper blades in the United States.
A Quick Note on Measurement: Even within the same model year, there can be slight variations based on trim level or manufacturing date. The sizes provided are the standard, most common sizes. Always physically measure your old blades or check your owner’s manual for absolute certainty before purchasing.
Honda Accord Wiper Blade Size Chart (1976-2022)
Here is a comprehensive breakdown by generation and model year.
First Generation (1976-1981)
* 1976-1981 Honda Accord: These early models typically used a symmetrical setup.
* Driver Side: 16″
* Passenger Side: 16″
* Rear Wiper: Not applicable.
Second Generation (1982-1985)
* 1982-1985 Honda Accord: Continued with the equal-length blades.
* Driver Side: 16″
* Passenger Side: 16″
* Rear Wiper: Not applicable.
Third Generation (1986-1989)
* 1986-1989 Honda Accord: A shift began here, with some models starting to use different sizes.
* Driver Side: 18″
* Passenger Side: 16″
* Rear Wiper: Not applicable.
Fourth Generation (1990-1993)
* 1990-1993 Honda Accord: The two-size setup became standard.
* Driver Side: 20″
* Passenger Side: 18″
* Rear Wiper: Not applicable.
Fifth Generation (1994-1997)
* 1994-1997 Honda Accord: Sizes stabilized for this popular generation.
* Driver Side: 20″
* Passenger Side: 18″
* Rear Wiper: Not applicable.
Sixth Generation (1998-2002)
* 1998-2002 Honda Accord: Sizes remained consistent for several years.
* Driver Side: 20″
* Passenger Side: 18″
* Rear Wiper: Not applicable.
Seventh Generation (2003-2007)
* 2003-2007 Honda Accord: This generation introduced a rear wiper for the coupe model.
* Sedan & Coupe (Front):
* Driver Side: 22″
* Passenger Side: 19″
* Coupe (Rear): 12″ (if equipped)
* Sedan (Rear): Not applicable.
Eighth Generation (2008-2012)
* 2008-2012 Honda Accord: Front sizes increased slightly.
* Sedan & Coupe (Front):
* Driver Side: 24″
* Passenger Side: 19″
* Coupe (Rear): 12″ (if equipped)
* Sedan (Rear): Not applicable.
Ninth Generation (2013-2017)
* 2013-2017 Honda Accord: The front sizes changed for the sedan.
* Sedan (Front):
* Driver Side: 26″
* Passenger Side: 18″
* Coupe (Front):
* Driver Side: 24″
* Passenger Side: 19″
* Coupe (Rear): 12″ (if equipped)
* Sedan (Rear): Not applicable.
Tenth Generation (2018-2022)
* 2018-2022 Honda Accord: The current generation uses a large driver-side blade.
* All Trims (Front):
* Driver Side: 26″
* Passenger Side: 19″
* Rear Wiper: Not applicable for sedans.
How to Measure Your Wiper Blades (The Foolproof Method)
If your Accord’s year isn’t listed or you want to be 100% sure, follow these steps to measure your existing blades.
1. Park Your Car and Lift the Wipers: Park your Accord and turn the ignition off. Gently lift the wiper arms away from the windshield until they lock in the service position.
2. Measure the Rubber Insert: The most accurate method is to measure just the rubber squeegee part. Use a ruler or tape measure from one end of the rubber to the other. This gives you the true blade length.
3. Measure the Entire Blade: Alternatively, you can measure the entire metal or frame assembly from end-to-end. This is the measurement most parts stores use.
4. Note the Attachment Type: Look at how the blade connects to the wiper arm. Common types include J-hook (a simple hook), side pin, or bayonet. Taking a photo can help when you shop.
Types of Wiper Blades for Your Accord
Not all wiper blades are created equal. Knowing the differnce helps you choose the best one for your budget and weather conditions.
* Conventional/Frame Blades: The traditional design with a metal frame. They are economical but can ice up in winter and sometimes streak if the frame gets bent.
* Beam Blades: These are one-piece, frameless blades that contour perfectly to your windshield. They perform better in snow and high speeds, reduce wind lift, and often last longer. Most modern Accords, especially from the 8th gen on, use this style.
* Hybrid Blades: Combine a sleeker design than conventional blades with some of the durability of beam blades. They are a good mid-point option.
* Winter Blades: These have a rubber boot covering the frame to prevent ice and snow buildup. They are essential for harsh winter climates.
Step-by-Step Guide to Replacing Your Accord’s Wiper Blades
Replacing wiper blades is a simple DIY task. Here’s how to do it safely.
1. Gather Supplies: You’ll need your new wiper blades, a towel or rag, and maybe a small piece of carpet or a glove to protect your windshield if the arm slips.
2. Prepare the Car: Turn the car off and lift the wiper arms to the service position. Place the towel under the arm hinge area to protect your windshield in case it falls.
3. Remove the Old Blade: Press the small tab or release button on the underside of the blade where it connects to the arm. While holding the tab, gently but firmly slide the blade off the J-hook or arm connector. Never let the wiper arm snap back onto the glass.
4. Attach the New Blade: Take your new blade and remove any protective cover. Align the new blade’s connector with the wiper arm hook. You should here a firm click when it’s fully seated. Give it a gentle tug to ensure it’s locked.
5. Lower the Arms: Gently lower the wiper arms back onto the windshield. Do not let them snap back.
6. Test and Clean: Turn on your wipers and test them. It’s also a good idea to clean the new rubber with a paper towel and windshield washer fluid to remove any factory coating.
Common Mistakes to Avoid
A few simple errors can lead to poor performance or damage.
* Getting the Wrong Size: A blade that’s too long will hit the windshield molding or other blade. A blade thats too short will leave an unwiped area.
* Forcing the Connection: If the blade isn’t attaching easily, don’t force it. Double-check that you have the correct attachment type.
* Letting the Arm Snap: The spring-loaded wiper arm can crack or chip your windshield if released uncontrolled. Always lower it gently.
* Ignoring the Rear Wiper: On coupe models, don’t forget the rear wiper. It uses a much smaller blade, usually around 12 inches.
When to Replace Your Wiper Blades
Don’t wait until you’re in a downpour to realize your blades are bad. Look for these signs:
* Streaking: Leaves thin, clear lines or water ribbons on the glass.
* Chattering or Skipping: The blade jumps or bounces across the windshield instead of gliding smoothly.
* Squeaking: A high-pitched noise with each wipe.
* Rubber Degradation: Check the rubber for cracks, splits, or brittleness.
* General Poor Wiping: Large areas remain wet or blurred after wiping.
As a general rule, plan to replace your wiper blades every 6 to 12 months for optimal performance. Sun, ozone, and use degrade the rubber over time, even if they aren’t used often.
FAQ: Honda Accord Wiper Blades
Q: Are Honda Accord wiper blades the same on both sides?
A: For most model years from 1986 onward, no. The driver’s side is typically longer than the passenger side. Always check the chart above for your specific year.
Q: Can I use a 26″ and 19″ blade set on my 2015 Accord?
A: That size is correct for a 2015 Accord Sedan. The 2015 Coupe uses a 24″ and 19″ set. Make sure you know your body style.
Q: Do I need special wiper blades for my Honda Accord?
A: Not “special,” but you do need the correct size and attachment type. Beam blades are the standard OEM-style for newer Accords and work very well.
Q: How do I find the wiper blade size without measuring?
A: The best sources are your vehicle’s owner’s manual, the manufacturer’s website, or a reliable auto parts store website where you can enter your make, model, and year. The chart in this article is also a reliable guide.
Q: What does “OE” mean for wiper blades?
A: OE stands for “Original Equipment.” It means the blade is designed to match the style and specifications of the blade that came on your Accord from the factory.
Q: Why are my new wiper blades still streaking?
A: This is often due to a dirty windshield or residue on the new rubber. Clean your windshield thoroughly with glass cleaner and wipe the new blade rubber with rubbing alcohol. Also, ensure the blade is securely attached and the arm isn’t bent.
Keeping your Honda Accord’s wiper blades in top condition is a small but vital part of routine maintenance. With the correct Honda Accord wiper blade sizes in hand, you can confidently purchase and install the right parts, ensuring you have a clear view of the road ahead no matter the weather. Remember to check them seasonally and replace them at least once a year for the best results and safety.